Timber Shakes
Spruce Shakes
A very cost-effective option, European Spruce is lightweight, stable and environmentally friendly. It has a lovely uniform texture and can be treated to increase durability and decay resistance.
Pressure impregnation is available on request.
Standard Spruce Shakes
Standard shakes are bevelled (chamfered) at an angle of 45° at the thick butt end.
They are hand split, random width, taper-cleaned by machine and bevelled at butt.
Fancy-Butt Shakes
These shakes are hand split, round scaled, taper cleaned by machine and bevelled at butt.
For further sizing information of all spruce shakes, please take a look below.
Product Information
Standard spruce shakes
| Shake lengths (mm) | Approx. thickness (mm) |
|---|---|
| 500 | 10-11 |
| 400 | 10 |
| 300 | 9 |
| 250 | 7 |
| 200 | 6 |
Fancy-butt spruce shakes
| Shake lengths (mm) | Width (mm) | Approx. thickness (mm) |
|---|---|---|
| 300 | 100 or 80 | 9 |
| 250 | 100 or 80 | 7 |
| 210 | 80 or 60 | 6 |
Coverage
The type of wood, shake length, method of laying, weather exposure and desired covering density should be taken into consideration when making calculations.
Please note: shakes are supplied in random widths and the packs calculated for a given coverage. The shakes should be used ‘as they come’, packs should not be sorted for widths.
Roof – shakes should be laid 3-ply
Exterior façade/wall – shakes should be laid 2-ply to 3-ply
Interior wall – shakes can be laid 2-ply
Calculation table for coverage
| Shake lengths (mm) | 500 | 400 | 300 | 250 | 200 | |
|---|---|---|---|---|---|---|
| Popular lengths for roof (R)/wall (W) | R/W | R/W | W | W | W | |
| Roof/Wall 3-ply ① (22° to 90°) | Exposure in mm ④ | 155 | 125 | 90 | 75 | 60 |
| Linear metres per m² | 6.45 | 8.0 | 11.11 | 13.33 | 16.66 | |
| Wall 2-ply ② (71° to 90°) | Exposure in mm ④ | 225 | 180 | 120 | 100 | 80 |
| Linear metres per m² | 4.45 | 5.56 | 8.33 | 10.0 | 12.5 |
1. The exposure should not exceed ⅓ the length of the shake. Minimum roof pitch approx. 18-20°
2. The exposure should not exceed ½ the length of the shake.
3. LM – Linear Metre (100cm x shake length)
4. EXP – Weather exposure (distance from the shake bottom edge to the next above shake bottom edge)
Additional Information
-
Wall Cladding
m² wall area
linear metre starter course (on the wall)
mm desired weather exposure
mm shake length
Roof Coverage
m² roof area
linear metres for eave (the first course of shakes laid on a roof)
mm desired weather exposure
mm shingle length
-
Shakes should be pre-drilled and stainless steel nails used.
-
If you wish to colour treat or paint spruce shakes, please contact us to discuss options.
-
We will be able to advise you of the delivery cost when you place your order. Once your order is ready, we will call you to arrange a delivery date/time.
Our WL West delivery lorry delivers to the following postcodes in the UK: BH, BN, BR, CR, CT, DA, DT, E, EC, EN, GU, HA, HP, IG, KT, LU, ME, MK, N, NW, OX, PO, RG, RH, RM, SE, SL, SM, SN, SO, SP, SW, TN, TW, UB, W, WD.
Outside of this area we will arrange delivery via a third party.
Timber shakes and shingles are delivered on a pallet. Please ensure you have the appropriate equipment and personnel to manage unloading, which might require more than one person.
-
Timber shakes and shingles are a hand-made product, please contact us for up-to-date lead times on specific products. Items in stock can be delivered in 2 weeks.
All images on this page are credited to © Rapold GmbH
Do you require timber shakes for your next project?
We are a leading UK timber merchant & machinist, supplying trade, commercial & homeowners
From providing high quality timber shakes and shingles to cladding and beams, we can help with your project needs. With over 155 years’ experience, timber is what we do. Get in touch with our Sales Team to get your timber shakes or shingles quote.